The Blue 5 ft. LuxCraft Adirondack Glider brings the classic curved-back Adirondack silhouette to a smooth, front-to-back glide. The tall, sloped back cradles your shoulders while the scooped seat takes the strain off your legs, so you can settle in for as long as you like. It's built from Poly Vinylethylene lumber reclaimed from post-consumer bottle waste (milk jugs and similar HDPE containers), decontaminated to over 99% purity, and pressed into board stock that's better than 90% recycled material by weight.
Why You'll Like It
- Solid recycled poly lumber body that never needs paint, stain, or sealant
- Curved Adirondack backrest and seat profile for relaxed, low-strain seating
- Won't crack, splinter, warp, or rot outdoors
- Stands up to sun, rain, and humidity without weathering
- Naturally resists mildew, bacteria, and termites
- UV-stabilized finish holds its color season after season
- Stainless steel hardware throughout for corrosion- and stain-free durability
- Covered by a residential lifetime limited warranty (commercial: 5-year limited)
- Made in the USA
Dimensions
| Length | 5 foot |
| Width | 67.5" |
| Depth | 30" |
| Height | 43" |
| Seat Dimensions | 60" W x 18" D |
| Weight | 130 lbs |
| Weight Capacity | 500 lbs |
| Floor to Seat Height | 17.75" |
| Requires Assembly | Yes |
Assembly Instructions
5 ft. Adirondack Glider Assembly Instructions
Warranty Information
What's In The Box
- (1) Seat Assembly
- (1) Back Assembly
- (2) Glider Base
- (2) Bearing Arm Supports
- (14) Back Slats
- (2) Armrests
- (2) Front-Back Crosspieces
- (2) Crosspiece Supports
- (2) Lintels
- (2) 5/16" x 3 1/2" Stainless Wafer Bolts
- (2) 5/16" x 2 1/2" Stainless Wafer Bolts
- (8) 5/16" x 2" Stainless Wafer Bolts
- (4) Nuts
- (4) Washers
- (56) 1 1/2" Screws
- (8) 2 1/2" Screws
- (44) 2" Screws
- (1) 5/32 Hex Key