LuxCraft's 4 ft. Adirondack Outdoor Glider brings the rocking-glide motion of a porch swing to a freestanding frame, wide enough for two to sit and rock side by side. Ergonomic curves run through the back and seat, cradling your head and shoulders while easing pressure off the backs of your legs. In Aruba Blue, the glider is built from Poly Vinylethylene lumber sourced from post-consumer bottle waste (think milk jugs), decontaminated to better than 99% HDPE purity, then compounded into rigid board stock that ends up over 90% recycled material by weight.
Features
- Over 90% recycled, virtually maintenance-free poly construction
- Adirondack-style curved backrest
- Won't crack, splinter, warp, or rot
- Stands up to sun, rain, and weather without deteriorating
- Resists mildew and bacterial growth
- UV-stabilized to resist fading
- Naturally termite resistant
- Corrosion- and stain-resistant stainless steel hardware
- Made in the USA, covered by a residential lifetime (or commercial 5-year) limited warranty
Dimensions
| Length | 4 foot |
| Width | 67.5" |
| Depth | 30" |
| Height | 43" |
| Seat Dimensions | 60"W x 18"D |
| Weight | 130 lbs |
| Weight Capacity | 500 lbs |
| Floor To Seat Height | 17.75" |
| Requires Assembly | Yes |
Assembly Instructions
Recycled Plastic Adirondack Outdoor Glider Assembly Instructions
Warranty Information
Poly Furniture Commercial Warranty
Poly Furniture Residential Warranty
What's In The Box
- (1) Seat Assembly
- (1) Back Assembly
- (2) Glider Base
- (2) Bearing Arm Supports
- (14) Back Slats
- (2) Armrests
- (2) Front-Back Crosspieces
- (2) Crosspiece Supports
- (2) Lintels
- (2) 5/16" x 3 1/2" Stainless Wafer Bolts
- (2) 5/16" x 2 1/2" Stainless Wafer Bolts
- (8) 5/16" x 2" Stainless Wafer Bolts
- (4) Nuts
- (4) Washers
- (56) 1 1/2" Screws
- (8) 2 1/2" Screws
- (44) 2" Screws
- (1) 5/32" Hex Key